Productdetails
Plaats van herkomst: Shandong China
Merknaam: JIURUNFA
Certificering: ISO9001
Modelnummer: HT-510
Betaling en verzendvoorwaarden
Min. bestelaantal: 1Ton
Prijs: Bespreekbaar
Verpakking Details: 25/50kg geweven tas bekleed met plastic zakken, of volgens de vereisten van klanten.
Levertijd: 7-15 dagen
Betalingscondities: L/C, T/T, Western Union
Levering vermogen: 30000 ton/maand
verschijning: |
Melkwitte vloeistof (wordt na droging transparante/elastische film) |
Type hars: |
acrylemulsie |
Dikte: |
1,02 – 1,30 g/cm³ |
stevige inhoud: |
50 – 75% |
Viscositeit (25℃): |
500 – 3000 mPa·s |
Ph-waarde: |
6,5 – 9,0 |
Treksterkte: |
≥1,0 – 1,8 MPa |
Verlenging bij breuk: |
≥200% (kan 300–1000% bereiken) |
Scheursterkte: |
≥10 kgf/cm |
Hechtsterkte: |
0,5 – 1,3 MPa |
Water ondoordringbaarheid: |
0,3 MPa, geen waterlekkage gedurende 30 minuten |
Flexibiliteit bij lage temperaturen: |
Geen scheuren bij -10℃ |
verschijning: |
Melkwitte vloeistof (wordt na droging transparante/elastische film) |
Type hars: |
acrylemulsie |
Dikte: |
1,02 – 1,30 g/cm³ |
stevige inhoud: |
50 – 75% |
Viscositeit (25℃): |
500 – 3000 mPa·s |
Ph-waarde: |
6,5 – 9,0 |
Treksterkte: |
≥1,0 – 1,8 MPa |
Verlenging bij breuk: |
≥200% (kan 300–1000% bereiken) |
Scheursterkte: |
≥10 kgf/cm |
Hechtsterkte: |
0,5 – 1,3 MPa |
Water ondoordringbaarheid: |
0,3 MPa, geen waterlekkage gedurende 30 minuten |
Flexibiliteit bij lage temperaturen: |
Geen scheuren bij -10℃ |
Jiurunfa Acrylic Emulsion Waterproof Coating is a high-performance water-based coating designed to provide durable and flexible waterproof protection. Formulated using advanced acrylic polymer technology, it cures to form a seamless, elastic waterproof membrane that effectively seals cracks and prevents moisture penetration into various substrates.
Jiurunfa Acrylic Emulsion Waterproof Coating is environmentally friendly, with low VOC content and contains no harmful solvents, meeting modern green building standards. It is easy to apply, can be brushed, rolled, or sprayed, dries quickly, and forms a highly efficient film, contributing to improved construction efficiency.
| Item | Typical Value |
| Appearance | Milky white liquid (becomes transparent/elastic film after drying) |
| Resin Type | Acrylic Emulsion |
| Density | 1.02 – 1.30 g/cm³ |
| Solid Content | 50 – 75% |
| Viscosity (25℃) | 500 – 3000 mPa·s |
| pH Value | 6.5 – 9.0 |
| Tensile Strength | ≥1.0 – 1.8 MPa |
| Elongation at Break | ≥200% (can reach 300–1000%) |
| Tear Strength | ≥10 kgf/cm |
| Adhesion Strength | 0.5 – 1.3 MPa |
| Water Impermeability | 0.3MPa, no water leakage for 30 minutes |
| Low Temp Flexibility | No cracks at -10℃ |
| VOC Content | ≤50 (Environmentally friendly) |
| Surface Dry Time | 2 – 4 hours |
| Fully Cured | 8 – 24 hours |
| Application Temp | 5 – 40℃ |
| Service Temp | -10 – 80℃ |
| UV Resistance | Excellent, no cracks |
| Weather Resistance | Excellent performance and long-term outdoor stability |
| Coverage | 1 – 2 kg/m² |
| Shelf Life | 12-15 months |
Acrylic Emulsion Waterproofing is a high-performance water-based coating that forms a seamless and durable waterproof membrane to effectively prevent water penetration and leakage. With excellent elasticity and crack-bridging ability, it adapts to structural movement without failure, while its strong adhesion ensures long-term bonding on concrete, cement, and other substrates. The product features outstanding weather and UV resistance, fast drying for efficient application, and a low VOC eco-friendly formulation suitable for both indoor and outdoor use. Its high solid content provides better coverage and cost efficiency, making it an ideal solution for roofs, bathrooms, basements, balconies, and exterior wall waterproofing.
A basement waterproofing project for an electronics factory faced challenges due to a high water table, damp substrate, and stringent environmental requirements, prohibiting the use of solvent-based waterproofing materials. Our Acrylic Emulsion Waterproofing product, water-based, environmentally friendly, and odorless, can be applied to damp surfaces. Its strong adhesion allows for a tight bond with concrete substrates, effectively preventing groundwater seepage. After application, it passed a 48-hour water tightness test on the first attempt, ensuring the safe operation of factory equipment and solving the dual challenges of waterproofing damp substrates and meeting environmental compliance requirements.
We are a professional manufacturer of Acrylic Emulsion Waterproofing materials, specializing in the production of high-quality, eco-friendly waterproof solutions. With advanced production equipment and strict quality control, we ensure stable performance and reliable products. Our products are widely used in construction and infrastructure projects and are exported to multiple countries. We are committed to providing competitive pricing, consistent quality, and dependable service to our global customers.
Video
Video
Video
Video
Video
Video
Video
Video
