جزئیات محصول
محل منبع: شاندونگ چین
نام تجاری: JIURUNFA
گواهی: ISO9001
شماره مدل: HT-510
شرایط پرداخت و ارسال
مقدار حداقل تعداد سفارش: 1 تن
قیمت: قابل مذاکره
جزئیات بسته بندی: 25/50 کیلوگرم کیسه بافته شده با کیسه های پلاستیکی یا با توجه به نیاز مشتریان.
زمان تحویل: 7-15 روز
شرایط پرداخت: L/C، T/T، وسترن یونیون
قابلیت ارائه: 30000 تن در ماه
ظاهر: |
مایع سفید شیری (بعد از خشک شدن به لایه شفاف/الاستیک تبدیل می شود) |
نوع رزین: |
امولسیون اکریلیک |
تراکم: |
1.02 - 1.30 g/cm³ |
محتوای جامد: |
50 - 75٪ |
ویسکوزیته (25 ℃): |
500 - 3000 mPa·s |
مقدار Ph: |
6.5 - 9.0 |
استحکام کششی: |
≥1.0 - 1.8 مگاپاسکال |
ازدیاد طول در شکست: |
≥200٪ (می تواند به 300-1000٪ برسد) |
قدرت اشک: |
≥10 کیلوگرم در سانتی متر |
استحکام چسبندگی: |
0.5 - 1.3 مگاپاسکال |
ناپذیری آب: |
0.3 مگا پاسکال، بدون نشت آب به مدت 30 دقیقه |
انعطاف پذیری دمای پایین: |
بدون ترک در -10 درجه سانتیگراد |
ظاهر: |
مایع سفید شیری (بعد از خشک شدن به لایه شفاف/الاستیک تبدیل می شود) |
نوع رزین: |
امولسیون اکریلیک |
تراکم: |
1.02 - 1.30 g/cm³ |
محتوای جامد: |
50 - 75٪ |
ویسکوزیته (25 ℃): |
500 - 3000 mPa·s |
مقدار Ph: |
6.5 - 9.0 |
استحکام کششی: |
≥1.0 - 1.8 مگاپاسکال |
ازدیاد طول در شکست: |
≥200٪ (می تواند به 300-1000٪ برسد) |
قدرت اشک: |
≥10 کیلوگرم در سانتی متر |
استحکام چسبندگی: |
0.5 - 1.3 مگاپاسکال |
ناپذیری آب: |
0.3 مگا پاسکال، بدون نشت آب به مدت 30 دقیقه |
انعطاف پذیری دمای پایین: |
بدون ترک در -10 درجه سانتیگراد |
Jiurunfa Acrylic Emulsion Waterproof Coating is a high-performance water-based coating designed to provide durable and flexible waterproof protection. Formulated using advanced acrylic polymer technology, it cures to form a seamless, elastic waterproof membrane that effectively seals cracks and prevents moisture penetration into various substrates.
Jiurunfa Acrylic Emulsion Waterproof Coating is environmentally friendly, with low VOC content and contains no harmful solvents, meeting modern green building standards. It is easy to apply, can be brushed, rolled, or sprayed, dries quickly, and forms a highly efficient film, contributing to improved construction efficiency.
| Item | Typical Value |
| Appearance | Milky white liquid (becomes transparent/elastic film after drying) |
| Resin Type | Acrylic Emulsion |
| Density | 1.02 – 1.30 g/cm³ |
| Solid Content | 50 – 75% |
| Viscosity (25℃) | 500 – 3000 mPa·s |
| pH Value | 6.5 – 9.0 |
| Tensile Strength | ≥1.0 – 1.8 MPa |
| Elongation at Break | ≥200% (can reach 300–1000%) |
| Tear Strength | ≥10 kgf/cm |
| Adhesion Strength | 0.5 – 1.3 MPa |
| Water Impermeability | 0.3MPa, no water leakage for 30 minutes |
| Low Temp Flexibility | No cracks at -10℃ |
| VOC Content | ≤50 (Environmentally friendly) |
| Surface Dry Time | 2 – 4 hours |
| Fully Cured | 8 – 24 hours |
| Application Temp | 5 – 40℃ |
| Service Temp | -10 – 80℃ |
| UV Resistance | Excellent, no cracks |
| Weather Resistance | Excellent performance and long-term outdoor stability |
| Coverage | 1 – 2 kg/m² |
| Shelf Life | 12-15 months |
Acrylic Emulsion Waterproofing is a high-performance water-based coating that forms a seamless and durable waterproof membrane to effectively prevent water penetration and leakage. With excellent elasticity and crack-bridging ability, it adapts to structural movement without failure, while its strong adhesion ensures long-term bonding on concrete, cement, and other substrates. The product features outstanding weather and UV resistance, fast drying for efficient application, and a low VOC eco-friendly formulation suitable for both indoor and outdoor use. Its high solid content provides better coverage and cost efficiency, making it an ideal solution for roofs, bathrooms, basements, balconies, and exterior wall waterproofing.
A basement waterproofing project for an electronics factory faced challenges due to a high water table, damp substrate, and stringent environmental requirements, prohibiting the use of solvent-based waterproofing materials. Our Acrylic Emulsion Waterproofing product, water-based, environmentally friendly, and odorless, can be applied to damp surfaces. Its strong adhesion allows for a tight bond with concrete substrates, effectively preventing groundwater seepage. After application, it passed a 48-hour water tightness test on the first attempt, ensuring the safe operation of factory equipment and solving the dual challenges of waterproofing damp substrates and meeting environmental compliance requirements.
We are a professional manufacturer of Acrylic Emulsion Waterproofing materials, specializing in the production of high-quality, eco-friendly waterproof solutions. With advanced production equipment and strict quality control, we ensure stable performance and reliable products. Our products are widely used in construction and infrastructure projects and are exported to multiple countries. We are committed to providing competitive pricing, consistent quality, and dependable service to our global customers.
Tags:
ویدیو
ویدیو
ویدیو
ویدیو
ویدیو
ویدیو
ویدیو
ویدیو
